Fragrance Lamp Instructions

Table of Contents

• Lamp Components
• Operating Instructions
• Extinguishing Your Lamp
• Warnings

Lamp Components

• Stone Wick (or Wick)
• Lamp Oil
  
• Funnel
  
• Fragrance Lamp (or Lamp)
  
• Snuff Cap
  
• Vent Cap (or Decorative Lid)
  

back to top

Operating Instructions

Note: If your lamp has already been filled and used and you are using it again, skip to Step 5.

	Step 1 Remove caps and wick and place funnel in lamp opening
	Step 2 Use funnel to fill lamp half-way full with oil. Note: Over filling lamp will cause it to operate improperly.
	Step 3 Insert cotton wick into lamp with stone resting in lamp neck.
	Step 4 Cover stone wick with snuff cap. Allow wick to completely absorb lamp oil for 15-20 minutes. Note: Don't rush this process. The wick needs to be completely saturated. Premature lighting of the wick can cause it to be damaged.
	Step 5 Remove snuff cap and light stone.
	Step 6 Heat stone for 2-3 minutes. Lamp may produce up to a 4" - 6" flame. Flame may slowly reduce to 1"-2", or extinguish by itself. Warning: Do not leave open flame unattended
	Step 7 Blow out any remaining flame. Warning: Do not put protective vent or snuff cap on over open flame.
	Step 8 Place protective vent cap over heated stone and enjoy the lovely frangrance and purified air! The catalytic fragrance lamp is now perfuming even though you don’t see a flame. It will not disperse fragrance while flame is burning. It will continue to perfume until stone is covered with cut off cap or oil supply is empty. Warning: Always put the protective vent cap on lamp to prevent burns.

Extinguishing Your Lamp

	Step 1 Remove protective vent cap. Warning: Caps will get hot so be careful when handling or setting on furniture
	Step 2 Cover stone wick with snuff cap and replace vent cap over snuff cap.

Warnings

The catalytic fragrance lamp is to be used only for the purpose of home perfuming and according to these use instructions. Use only with catalytic lamp type oil. Do not use with any other type of combustible fuels or liquids.

Place catalytic fragrance lamp on flat surface away from all combustinble materials above it or next to it.

Fragrance Lamp oil contains alcohol, which can damage furniture finishes. Please use a saucer or plateau under your lamp to protect your furniture from oil spills and heat.

• Never leave open flame unattended.
  
• Do not leave lamp perfuming overnight or for long periods of time.
  
• Always blow out flame. Do not extinguish flame with cut off cap.
  
• Do not put protective vent cap over open flame.
  
• Do not touch stone wick as it is red hot even though you do not see a flame.
  
• Always cover the stone with protective vent cap to prevent accidental burns.
  
• Protective vent cap and cut off cap will get hot. Please handle caps with care
  

Precautions Place the catalytic fragrance lamp on flat surface away from all combustible materials above or next to it. Fragrance Lamp oil contains alcohol, which may damage furniture finish and create fire hazard. Have a wet cloth available to clean up any oil spills immediately.

Browse our selection of Fragrance Lamps and Lamp Oils or find out more About Fragrance Lamps